Blog

Module LoRa32 for LoRa Network

This developement board is an SX1276 chip based on the increased ESP32 WIFI OLED network, namely the LoRa remote modem, frequency 868 MHz, high sensitivity over 148 dBm, + 20 dBm output power, high reliability, long transmission distance.

Built-in 32-megabyte Flash Wi-Fi antenna, 0.96-inch blue display, lithium battery charging circuit, CP2102 interface and USB serial chip, ideal development environment support, can be used to test programs.

Operating voltage: 3.3 to 7 V.
Operating Temperature Range: -40 ° C to + 90 ° C.
Support Sniffer software protocol analysis, Station mode, SoftAP and Wi-Fi Direct.
Data transfer rate: 150 Mbps @ 11n HT40., 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b.
Transmit power: 19.5 dBm at 11b, 16.5 dBm at 11g, 15.5 dBm at 11n.
Receiver sensitivity up to -98 dBm.
UDP supports 135 Mbps bandwidth